prikaz prve stranice dokumenta Puštanje u rad makete inverterski napajanog asinkronog motora
Access restricted to students and staff of home institution
undergraduate thesis
Puštanje u rad makete inverterski napajanog asinkronog motora
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:658705
Koščak, Karlo
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Power Engineering

Cite this document

Koščak, K. (2021). Puštanje u rad makete inverterski napajanog asinkronog motora (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:658705

Koščak, Karlo. "Puštanje u rad makete inverterski napajanog asinkronog motora." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:658705

Koščak, Karlo. "Puštanje u rad makete inverterski napajanog asinkronog motora." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:658705

Koščak, K. (2021). 'Puštanje u rad makete inverterski napajanog asinkronog motora', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 25 April 2024, https://urn.nsk.hr/urn:nbn:hr:179:658705

Koščak K. Puštanje u rad makete inverterski napajanog asinkronog motora [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2024 April 25] Available at: https://urn.nsk.hr/urn:nbn:hr:179:658705

K. Koščak, "Puštanje u rad makete inverterski napajanog asinkronog motora", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:658705

Please login to the repository to save this object to your list.
Metadata
TitlePuštanje u rad makete inverterski napajanog asinkronog motora
Title (english)Commissioning of inverter fed induction motor drive
AuthorKarlo Koščak
MentorMarin Despalatović (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Power Engineering)
Split
Defense date and country2021-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Power Engineering
Abstract
U uvodnom dijelu rada dan je pregled osnovnih karakteristika frekventno reguliranih elektromotornih pogona. Zatim su u drugom poglavlju navedene osnovne karakteristike te su prikazani i objašnjeni strukturni blok dijagrami za korištenu upravljačku (EVAL-M1-101T) i energetsku (EVAL M1-MI 240-A) razvojnu pločicu. Upisivanje parametara elektromotora i nadzor nad njegovim radom provedeno je kroz dva softverska alata koja su opisana u trećem i četvrtom poglavlju. Prvi od njih je MCE Wizard u kojem korisnik korak po korak upisuje sistemske postavke te parametre elektromotornog pogona vezane uz rad sustava u cjelini. Na primjeru realizirane skripte u C kodu objašnjeno je skalarno (U/f) upravljanje strojem. Drugi alat je MCE Designer koji služi za parametriranje i upravljanje reguliranim elektromotornim pogonom te za analizu odziva procesnih varijabli sustava u grafičkom obliku. U petom poglavlju opisana je laboratorijska maketa koja se sastoji od objekta regulacije – trofaznog asinkronog kaveznog motora, makete energetskog pretvarača korištene za pogon tog stroja, strujnih i naponskih mjernih sondi priključenih na digitalni osciloskop te tahometra koji je korišten za mjerenje brzine vrtnje. Kako bi se potvrdila funkcionalnost napisane skripte te ispravnost podešenog skalarnog upravljanja provedena su mjerenja frekvencije, napona i struje za različite iznose brzine vrtnje uz različite iznose registra TrqBoost-a u stacionarnom stanju. U praktičnom dijelu rada također su snimljeni odzivi i u dinamičkim režimima rada pri čemu je kao referentan odabran primjer reverziranja elektromotora. Validacija sustava u cjelini napravljena je na način da su rezultatati procesnih varijabli snimljenih u MCE Designer-u izravno uspoređivani s rezultatima mjerenja dobivenim pomoću Handyscope HS5 digitalnog USB osciloskopa. Na temelju usporedbe rezultata u radu može se konstatirati kako su eksperimentalno potvrđeni teorijski modeli reguliranog elektromotornog pogona.
Abstract (english)
An overview of the basic characteristics of frequency controlled electric drives is given in introduction. Subsequently, in the second chapter, the basic characteristics, and the block diagrams of control development board (EVAL-M1-101T) and evaluation board (EVAL M1-MI 240-A) are presented and explained. Parametrization of the electric drive and monitoring of process variables were carried out through manufacturer supplied two software tools. Corresponding procedures are described in the third and fourth chapters. First application, MCE Wizard, is used for step-by-step system setup of evaluation boards and then configuration of entire electric drive. Furthermore, induction machine scalar control is implemented by C-code script. Second application, MCE Designer, is used for parameterization and control of electric drives, and for monitoring and evaluation of process variables responses. Description of the laboratory setup consisting of three-phase induction cage machine, frequency converter, current and voltage measuring probes connected to a digital oscilloscope and a tachometer used for measuring the speed of rotation is given in the fifth chapter. In order to validate the realized C-code script used for induction machine scalar control, frequency, voltage and current measurements were performed for various speeds using different TrqBoost register values at steady-state operation. Various responses were caried out in transient states while in experiment results section electric drive reversing was chosen as case study. The laboratory setup validation was performed by means of MCE Designer process variables responses comparison with measurements obtained using Handyscope HS5 digital oscilloscope. Based on responses comparison analysis presented in this thesis one can conclude that the model of electric drive has been experimentally verified.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:658705
Study programmeTitle: Electrical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: Stručni/Stručna prvostupnik/prvostupnica inženjer/inženjerka elektrotehnike (Stručni/Stručna prvostupnik/prvostupnica inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Created on2021-12-07 08:54:16