prikaz prve stranice dokumenta Konstrukcija tradicijskog drvenog kaića
Access restricted to students and staff of home institution
undergraduate thesis
Konstrukcija tradicijskog drvenog kaića
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:189415
Šeparović, Tino
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Cite this document

Šeparović, T. (2021). Konstrukcija tradicijskog drvenog kaića (Undergraduate thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:189415

Šeparović, Tino. "Konstrukcija tradicijskog drvenog kaića." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:189415

Šeparović, Tino. "Konstrukcija tradicijskog drvenog kaića." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:189415

Šeparović, T. (2021). 'Konstrukcija tradicijskog drvenog kaića', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 22 May 2022, https://urn.nsk.hr/urn:nbn:hr:179:189415

Šeparović T. Konstrukcija tradicijskog drvenog kaića [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2022 May 22] Available at: https://urn.nsk.hr/urn:nbn:hr:179:189415

T. Šeparović, "Konstrukcija tradicijskog drvenog kaića", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:189415

Please login to the repository to save this object to your list.
Metadata
TitleKonstrukcija tradicijskog drvenog kaića
AuthorTino Šeparović
MentorBranko Blagojević (mentor)
MentorJosip Bašić (komentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2021-09-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Shipbuilding
Abstract
U ovom završnom radu izrađena je dokumentacija za zadani kaić, odnosno modelirani su nacrti forme te njegova struktura. Kaić je izrađen od drva, duljine je oko 4,4 m te ima 16 rebara. Sredina kaića (teoretsko glavno rebro) je između rebara R9 i R10 gdje širina iznosi oko 1,5 m, a visina oko 0,8 m. Ima ravno odsječenu (uglastu) krmu koja završava krmenim zrcalom. Za pogon se koriste vesla i jedro stoga su sa svake strane na razmu kaića ugrađena po tri jastučića (nosača palaca) i palci za postavljanje vesala te baza pete jarbola s izrezom za postavljanje jarbola. U radu je dan pregled pet kaića sličnih dimenzija i namjene: Pasare „Julijana“ iz Lovrana, kaića iz Prigradice iz 1954. godine, kaića iz Prigradice duljine 4 m, kaića iz Prigradice iz 1932. godine te kaića iz Rasohe. Navedeni su svi podaci do kojih se uspjelo doći te su opisani svi elementi strukture za svaki od pet navedenih kaića. Također, u radu je opisana izrada geometrije zadanog kaića prilagodbom dostupnih nacrta forme sličnog kaića u 3D programu Rhinoceros, dan je prikaz nacrta formi sličnog kaića i zadanog kaića s ucrtanim uzdužnicama i vodnim linijama na određenim gazovima te tablica očitanja rebara. Nakon toga je opisana izrada strukture zadanog kaića te svi njeni elementi. Za sve elemente dane su dimenzije očitane iz modela izrađenog u 3D programu Rhinoceros te preporuke za materijal njihove izrade i načina spajanja za pojedini strukturni spoj. Dane su tablica s duljinama rebara i preklopa te tablica širina i visina rebara zadanog kaića. Na kraju je dan i prikaz svakog elementa strukture pojedinačno te poprečni presjek Rhino modela kaića na kojem su vidljivi i navedeni svi elementi na skupu.
Abstract (english)
This thesis presents the process of designing the structure of a small wooden boat. Boat is made of wood, is about 4,4 m long and has 16 ribs. The middle of the boat (theoretical main rib) is between the ribs R9 and R10 where the width is about 1,5 m and the height about 0,8 m. It has a flat cut (angular) stern which ends with transom. Oars and a sail are used for propulsion, so on each side of the boat there are three pads (thumb carriers) and thumbs for placing the oars and the base of the heel of the mast with a cutout for placing the mast. The project gives an overview of five boats of similar dimensions and purpose: Boat "Julijana" from Lovran, boat from Prigradica from 1954, boat from Prigradica 4 m long, boat from Prigradica from 1932 and boat from Rasoha. All the data that could be obtained are listed and all the elements of the structure for each of the five mentioned boats are described. The geometry of a given boat has been adapted for structural design purposes based on available plans of a similar boat modeled in program Rhinoceros. The construction of the structure of the given boat and all its elements are described. For all the elements, the dimensions were read from the model made in Rhinoceros, as well as the recommendations for the material of their construction and the method of joining of elements. An overview of each element of the structure is given, as well as a cross-section drawings made from Rhino model.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:189415
Study programmeTitle: Naval Architecture
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka brodogradnje (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka brodogradnje)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Created on2021-12-09 14:10:41