prikaz prve stranice dokumenta Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava
Access restricted to students and staff of home institution
master's thesis
Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:047030
Vidović, Tino
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Cite this document

Vidović, T. (2021). Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:047030

Vidović, Tino. "Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:047030

Vidović, Tino. "Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:047030

Vidović, T. (2021). 'Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 27 May 2022, https://urn.nsk.hr/urn:nbn:hr:179:047030

Vidović T. Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2022 May 27] Available at: https://urn.nsk.hr/urn:nbn:hr:179:047030

T. Vidović, "Razvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:047030

Please login to the repository to save this object to your list.
Metadata
TitleRazvoj modela dizelskog motora za primjenu u simulaciji brodskih energetskih sustava
Title (english)Development of a diesel engine model for application in marine power systems
AuthorTino Vidović
MentorGojmir Radica (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2021-07-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj rada je bio modeliranje brodskog pogonskog sustava u OpenModelica softveru. Za kalibraciju su korišteni mjereni podaci dobiveni na probnom stolu i tokom probne vožnje. Primarni zadatak je bio razvoj i kalibracija pojedinih elemenata pogonskog sustava, kao što su turbopuhalo, cilindar, filtar zraka i slično. Cilj je bio dobiti kalibrirani model ispitivanog motora koji bi se mogao koristiti za poboljšavanje radnih parametara motora i simulaciju rada samog motora u realnom vremenu. Opisani su najvažniji parametri za opis rada motora i pomoćne opreme. Kod simuliranja rada motora, model izgaranja iznimno je bitan. Objašnjen je korišteni model izgaranja te su dane neke buduće smjernice gdje bi razvoj modela mogao ići. Svi rezultati dobiveni mjerenjima i simulacijama su detaljno analizirani i pojašnjeni su uzroci njihova ponašanja.
Abstract (english)
The aim of the work was to model a marine power system in OpenModelica software. Measured data was obtained on the test bench and during the test drive and was used later for calibration. The primary task was the development and calibration of individual elements of the power system, such as a turbocharger, cylinder, air filter etc. Special attention is given to the modeling of the combustion inside cylinder in the simulation model. The aim was to obtain a calibrated model of the tested engine that could be used later to improve the operating parameters of the engine and simulate the operation of the engine in real time. The most important parameters for describing the operation of the engine and auxiliary equipment are described. When simulating engine operation, the combustion model is extremely important. The used combustion model is explained and there are some future guidelines how the model could be developed. All results obtained by measurements and simulations were analyzed in detail and explained.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:047030
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Structures and Energy Technology
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Created on2021-11-24 10:50:28