prikaz prve stranice dokumenta Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste
  Download
PDF 4.03 MB
undergraduate thesis
Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste
završni rad
Split: University of Split, Faculty of Chemistry and Technology, 2017. urn:nbn:hr:167:533982
Čačinović, Nives
University of Split
Faculty of Chemistry and Technology
Division of Engineering and Chemistry

Cite this document

Čačinović, N. (2017). Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste : završni rad (Undergraduate thesis). Split: University of Split, Faculty of Chemistry and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:167:533982

Čačinović, Nives. "Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2017. https://urn.nsk.hr/urn:nbn:hr:167:533982

Čačinović, Nives. "Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste : završni rad." Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, 2017. https://urn.nsk.hr/urn:nbn:hr:167:533982

Čačinović, N. (2017). 'Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste : završni rad', Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, accessed 27 April 2024, https://urn.nsk.hr/urn:nbn:hr:167:533982

Čačinović N. Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste : završni rad [Undergraduate thesis]. Split: University of Split, Faculty of Chemistry and Technology; 2017 [cited 2024 April 27] Available at: https://urn.nsk.hr/urn:nbn:hr:167:533982

N. Čačinović, "Utjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste : završni rad", Undergraduate thesis, University of Split, Faculty of Chemistry and Technology, Split, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:167:533982

Please login to the repository to save this object to your list.
Metadata
TitleUtjecaj dodatka i finoće mliva otpadnog ambalažnog stakla na specifičnu električnu provodnost cementne paste : završni rad
Title (english)The influence od addition and fineness of waste container glass on specific electrical conductivity of cement paste : bachelor thesis
AuthorNives Čačinović
MentorDamir Barbir (mentor)
Committee memberDamir Barbir (predsjednik povjerenstva)
GranterUniversity of Split
Faculty of Chemistry and Technology
(Division of Engineering and Chemistry)
Split
Defense date and country2017-07-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
U ovom radu provedeno je određivanje specifične električne provodnosti cementnih pasti, bez dodatka i uz dodatak 20 mas. % otpadnog ambalažnog stakla različite finoće mliva (<45 µm, 125-250 µm, 250-500 µm). Mjerenja su provedena u termostatu pri 20 °C i pri vodocementnom, V/C = 0,5 i voda/kruto omjeru, V/K = 0,5. Sve dobivene krivulje ovisnosti specifične električne provodnosti o vremenu hidratacije cementnih pasti imaju sličan grafički oblik s naglašenim vrhom maksimalne provodnosti. Vrijeme početka vezivanja za pojedini tip cementa odgovara vremenu pojave maksimalne specifične provodnosti. Iz rezultata se može zaključiti da dodatak otpadnog ambalažnog stakla uzrokuje pad vrijednosti specifične električne provodnosti. Finoća mliva nema značajan utjecaj na vrijeme pojave i vrijednost maksimalne električne provodnosti. Također, dodatak otpadnog stakla ne utječe na početak vezivanja cementnih pasti. Budući da su za svaki uzorak provedena po dva mjerenja, uočena je dobra ponovljivost mjernih podataka.
Abstract (english)
In this paper, the determination of the specific electrical conductivity of the cement pastes was carried out without the addition and with addition of 20 wt. % of waste container glass with different fineness (<45 µm, 125-250 µm, 250-500 µm). The measurements were carried out in a thermostat at 20 °C and at the water/cement ratio, W/C=0.5 and water/solid ratio, W/S=0.5. All obtained curves of specific electrical conductivity dependence on the hydration time of the cement paste have a similar graphical shape with a pronounced peak of maximum conductivity. The start of binding time for a particular type of cement corresponds to the time of occurrence of maximum specific conductivity. From the results it can be concluded that the addition of waste container glass decreases specific electrical conductivity values. The different particle size of waste glass does not have a significant influence on the time of appearance and the value of maximum electrical conductivity. Also, the addition of waste glass does not affect the start of binding time of cement pastes. Since two measurements were performed for each sample, good repeatability of metric data was observed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:167:533982
Study programmeTitle: Chemical Technology; specializations in: Chemical Engineering, Environmental Protection
Course: Chemical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Public noteKljučne riječi doradio knjižničar/ Key words are revised by the librarian
RepositoryRepository of the Faculty of chemistry and technology
Created on2017-09-04 11:01:20