prikaz prve stranice dokumenta UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA
Access restricted to students and staff of home institution
undergraduate thesis
UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA
Split: University of Split, University Department of Professional Studies, 2020. urn:nbn:hr:228:065572
Ivičević, Lucija
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Cite this document

Ivičević, L. (2020). UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA (Undergraduate thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:065572

Ivičević, Lucija. "UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA." Undergraduate thesis, University of Split, University Department of Professional Studies, 2020. https://urn.nsk.hr/urn:nbn:hr:228:065572

Ivičević, Lucija. "UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA." Undergraduate thesis, University of Split, University Department of Professional Studies, 2020. https://urn.nsk.hr/urn:nbn:hr:228:065572

Ivičević, L. (2020). 'UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA', Undergraduate thesis, University of Split, University Department of Professional Studies, accessed 25 May 2022, https://urn.nsk.hr/urn:nbn:hr:228:065572

Ivičević L. UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA [Undergraduate thesis]. Split: University of Split, University Department of Professional Studies; 2020 [cited 2022 May 25] Available at: https://urn.nsk.hr/urn:nbn:hr:228:065572

L. Ivičević, "UVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA", Undergraduate thesis, University of Split, University Department of Professional Studies, Split, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:228:065572

Please login to the repository to save this object to your list.
Metadata
TitleUVIJANJE ŠTAPOVA OKRUGLOG I NEOKRUGLOG POPREČNOG PRESJEKA
Title (english)TORSION OF CIRCULAR AND NON-CIRCULAR CROSS SECTION BARS
AuthorLucija Ivičević
MentorAdo Matoković (mentor)
Committee memberIgor Gabrić (član povjerenstva)
Committee memberVladimir Vetma (član povjerenstva)
GranterUniversity of Split
University Department of Professional Studies
(Department of Mechanical Engineering)
Split
Defense date and country2020-09-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U završnom radu analizirano je uvijanje štapova okruglog i neokruglog poprečnog presjeka. Prikazano je kako se posmično naprezanje na štapovima okruglog poprečnog presjeka, po kružnom presjeku linearno mijenja te dostiže svoj maksimum na vanjskoj površini, a suprotno tome naprezanje u prizmatičnim oblicima u najudaljenijim točkama, vrhovima, biti će nula. Ukazalo se da pri deformacijama štapova kružnog poprečnog presjeka, poprečni presjeci ostanu ravni i okomiti na uzdužnu os štapa, ali i da te teorije ne vrijede kod neokruglih štapova. Uz riješene primjere zadataka za različite vrste štapova pri uvijanju, spominje se i mogućnost digitalnog testiranja šipki na uređaju za ispitivanje torzije. Dvije osovine različitog materijala su testirane. Dimenzioniranje štapova izvršeno je prema uvjetu čvrstoće i krutosti.
Abstract (english)
In the final paper, the torsion of circular and non-circular bars was analysed. It is shown that the shear stress on bars of round cross-section changes linearly along the circular cross-section and reaches its maximum on the outer surface, while the stress in prismatic bars at the most distant points, the vertices, will be zero. It has been pointed out that in the case of deformations of bars of circular cross - section, the cross - sections remain straight and perpendicular to the longitudinal axis of the bar, but also that these theories do not apply to non - circular rods. In addition to the solved examples of tasks for different types of torsion bars, the possibility of digital testing of bars on a torsion testing device is also mentioned. Two axles of different materials were tested. The sizing of the bars was performed according to the condition of strength and stiffness.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:065572
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of University Department of Professional Studies
Created on2020-11-25 12:36:52